Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
Instant Timer Recording(ITR)
Your VCR allows you to make recordings using a variety of simple methods : Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Timer Recording you may record at a later time (up to 1 month from the present). Up to 7 of these automatic recordings may be set. VIDEO Plus+ Recording greatly simplifies entering the date, channel, start and end times of a Timer Recording . Make sure that you have correctly installed your VCR as described earlier in this book. Turn on your TV and select the channel that you set up for video playback. Press POWER to turn on your VCR. Insert a video cassette with protection tab into your VCR.
The video cassette should have the window side facing up and the arrow facing away from you.
Press L or M to select the programme number you wish to record.
CLEAR OK
If you wish to record directly from the SCART or AUDIO sockets repeatedly press AV until the socket you wish to record from is displayed.
TV/VIDEO
i
0
CM SKIP
CLK/CNT
PA
USE/
SHOWVIEW VIDEO Plus+
LP
AV
C.LOCK
EJECT POWER
You may also directly select programme number using the numbered buttons on the remote control.
ENR/ DEP
1 4 7
TV/VCR
2 5 8 0
3 6 9
CM SKIP
SC01 Hi-Fi Sound only recording using the AUDIO IN sockets on the front of your VCR. AV1 Sound and Picture recording using the lower SCART socket on the back of your VCR. AV2 Sound and Picture recording using the upper SCART socket on the back of your VCR. AV3 Recording from VIDEO IN and AUDIO IN (Left & Right) using the sockets on the front of your VCR.
If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape.
